主燃孔对旋流杯下游流场的影响

采用PDA（Phase Doppler Analyzer）测量系统对带双轴向旋流杯、主燃孔和冷却气流的模型燃烧室的主燃区流场（以下简称真实结构）进行了实验研究,测量了燃烧室内流场的特性,并与不带主燃孔和冷却气流的头部旋流杯（以下简称纯头部结构）的气流场进行了对比.发现真实结构燃烧室内的回流区不再是轴对称,主燃孔和二次气流的存在使回流区明显被压扁（最扁处的长轴约为短轴的1.6倍）;真实结构的回流区长度明显缩短,其长度L与旋流杯出口直径D的比值（L/D）约为1.3,而纯头部结构的L/D约为2.5.     

测量透明位相物场的激光纹影-散斑干涉系统(英文)

本文给出了诊断相位场,如燃烧、对流、自由射流、超声速流场和等离子体等的一种激光纹影-散斑干涉系统。利用这套光学系统可在同一瞬时获得流场的散斑图和与之相应的剪切干涉图。作为实验,对一非定常波动的火焰(本生灯)进行了测试,实验表明用散斑照相术有可能得到密度波动的湍流场的定量结果;作为定量测试,对一沿竖直平板的自然对流,同时应用散斑照相和差纹影干涉术进行了定量分析,其结果的一致性很好。本文最后给出了散斑图的傅氏变换空间滤波的全场类似子纹影干涉图的流场显示照片。     

彩色三维激光快速成型技术的研究

目前逆向工程采用线结构激光和一个彩色面阵CCD摄像机构成三维彩色扫描系统,彩色CCD摄像机分两次对被测物体成像,首先摄取物体的彩色图片,然后加用滤光片再摄取激光光平面上的三维信息.最后将两次获取的信息重叠,便可得到三维彩色信息.提出了激光光平面方程式三维测量方法,建立了相应的数学模型.研制成一套适用于彩色逆向工程流程,并进行了实验研究,给出了实验结果.     

以激光束为基准测量工作台直线运动误差的原理探讨

提出一种以两束激光为基准测量工作台直线运动误差(五个自由度)的方法,并根据刚体运动学的基本原理导出了相应的数学模型。所获得的误差计算公式形式简单,计算方便,适用于实时、现场运动精度测量及补偿。     

飞机机身自动对接技术研究

介绍了飞机机身对接方式、采用的对接基准和对接测量方法,并以某飞机机身对接为实例,详细介绍了某型号机身自动化对接平台的建立流程、装配协调方法及激光跟踪仪和激光准直仪相结合的测量方法.     

深空探测器无线电干涉测量开源数据处理系统构建及试验

为更好地开展深空无线电干涉测量试验,基于DiFX(Distributed FX,分布式FX型相关处理)、SPICE(Spacecraft Planet Instrument Camera-matrix Events,航天器行星仪器照相机矩阵事件)、HOPS(Haystack Observatory Postprocessing System,Haystack克天文台后处理系统)及AIPS(Astronomical Image Processing System,天文图像处理系统)等开源软件,搭建了一套可用于深空探测器信号相关处理的无线电干涉测量数据处理系统。首先介绍了该系统的整体架构及组成,然后介绍了系统各组成模块的功能及工作原理,最后利用该系统对嫦娥三号着陆器开展了观测试验,并对观测数据进行了处理。试验结果表明,该系统能成功实现深空航天器信号的相关处理、条纹拟合,以及时延解算等功能,有望为我国嫦娥五号任务及火星探测任务数据处理提供支持。     

飞秒激光能量密度对镍基合金重铸层和加工效率的影响

以航空发动机叶片制孔为导向,结合飞秒激光对单晶镍基高温合金材料的非热熔性损伤阈值(Φth1)和热熔性损伤阈值(Φth2)特征,研究了飞秒激光能量密度(0Φ44.2J/cm2)对制孔重铸层和加工效率的影响规律。研究结果表明:在Φth1ΦΦth2时,镍基合金经飞秒激光加工后加工侧壁没有出现明显的重铸物;在ΦΦth2时,加工侧壁开始出现重铸物,并随着能量密度的增加,重铸层厚度增大。在试验结果的基础上,建立了飞秒激光单脉冲加工深度与能量密度的定量关系。能量密度越高,飞秒激光单脉冲加工深度越大,加工效率越高。     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

A shortcut to marking 3D target curves on curved surface via a galvanometric laser scanner

Marking arbitrary three-dimensional(3D) target curves on given objects with curved surface is required in many industrial fields, such as fabric prepreg placement in composite material part fabrication, product assembly, surface painting for decoration, etc. A shortcut to the solution of this intractable problem is proposed by utilizing a galvanometric laser scanner(GLS) with the aid of a camera. Without using the existing tedious GLS calibration procedures,the proposed method directly establishes a mapping between the 3D coordinates of the laser spots on the object surface and the control voltages of the scanner. A single-hidden layer feedforward neural network(SLFN) is employed to model the mapping. By projecting a dense grid of laser spots on the object to be marked and simultaneously taking only one image, the SLFN model is trained in minutes via a linear solving mechanism. Experiments demonstrate that the trained SLFN model has a good generalization performance for marking 3D target curves. The 3D laser marking errors on experimental objects are less than 0.5 mm. The proposed method is especially suitable for on-site use and can be conveniently extended to multiple GLSs for marking large complex objects.     

内外分区空间统一精度场建立方法研究

针对内外分区空间内结构和设备安装的数字化测量需求,研究内外参考点之间的关联技术,构建与外测量精度场相统一的内测量精度场。对于内外空间不同的开口数,利用多测点定位法、二测点和水平仪单站位定位法、二测点和水平仪双站位定位法等方法建立内精度场,实现与外精度场的统一。以某型设备为例进行试验表明,利用内外精度场测量同一检测点进行比较,测量的最大不一致误差为0.14 mm,证明构建模式可行、简单、可靠。